Guest Blogger! With this Ring - DIY

I am loving all of Darci's DIY projects! I cannot thank her enough for these posts! It really makes you realize these are do'able! So, without further ado, here is Darci's DIY Envelope Liners!!

Seeing as how I am a glutton for punishment, I decided to make my own envelope liners for our wedding. It sounds like a daunting task at first but I can assure you that if you give yourself enough time, it can be worth it to have envelopes lined in the paper you have year heart set on (which is why I started this project to begin with)!



It's sometimes easier to pull the envelope apart, but I tried to conserve so I measured one that was still in tact. I used a regular manila envelope to create a template, and started by cutting it so that it was 1/8 of an inch shorter than the envelope on each side:

For the top portion, I cut the manila envelope so that it was about 1/4 of an inch from the top point of the envelope. Then I put the entire square into the envelope itself:

Then I put a ruler at the top of the point and made a (clearly not so straight) line onto the template so that I had a mark for the upper most point:

Then take a ruler and make a line from the crease of the envelope to the mark you just made for the upper most center point:

Make those lines on either side and then cut off the corners...and there's your template! Honestly, making the template perfect took me the longest. From here on out is pretty straightforward.

Just put the template on your paper of choice and trace away. If you use a corner of the paper you only have to make three quick lines:

Cut the liner out along the lines you just made:

And insert into the envelope!

Now you just need to get a nice crease so that it all folds together nicely. So I just folded the envelope flap down and used a boning folder along the edge to make a crease:

Now you just take a tape roller (these things save a ton of time) and put tape on each of the edges:

Press it into the envelope flap, and viola! Once the template is finished it takes just a few minutes to make the actual liner. I traced a bunch of them at once, and then cut about 25 of them in under a half an hour.